Kinedyne manufactures a complete line of Series E, A and F track designed to provide the attachment point for a wide variety of interior van cargo control systems. Kinedyne Logistic Track is designed to accept all end fittings, sockets, beams and bars designed for use in Series E, A and F track. Series E and A track are offered standard in 10 ft. (3m) lengths with special lengths available upon request. Minimum quantity may be required. Tracks can be attached with screws, rivets or by welding. A specific fastener size and/or mounting method should be determined by the vehicle manufacturer or a qualified installer. Care shall be taken to ensure that installation environments and materials do not create a potential for corrosion. Logistic Tracks Must Ship Common Carrier.   Most Are Not UPSable.

Material: High strength steel; 11 gauge
Minimum Yield: 50,000 psi.
Finish: Gray, Powder Coat
Length: 10 ft., 3 m.
Weight: 13.0 lbs., 5.9 kgs.
Must Ship Common Carrier

Series E Track Vertical

Material: High strength steel; 11 gauge
Minimum Yeild: 50,500 psi.
Finish: Gray, Powder Coat
Length: 5 ft., 1.5 m.
Weight: 6.5 lbs., 3.0 lgs.
UPSable, Additional Handling Charges May Apply

Series E Track Horizontal

Material: High strength steel; 12 gauge
Minimum Yield: 50,000 psi.
Finish: Galvanized
Length: 10 ft., 3 m.
Weight: 16.1 lbs., 7.4 kgs.
Must Ship Common Carrier

Series E Track Horizontal 

Material: High strength steel; 12 gauge
Minimum Yield: 50,000 psi.
Finish: Gray, Powder Coat
Length: 10 ft., 3 m.
Weight: 16.0 lbs., 7.3 kgs
Must Ship Common Carrier

Series E Track Horizontal 

Material: High Strength Steel; 12 gauge
Minimum Yield: 50,000 psi
Finish: Gray, Powder Coat
Length 5 ft., 1.5 m
Weight: 8.0 lbs., 3.6 kgs.
UPSable, Additional Handling Charges May Apply

End Cap

For use with horizontal E or A track.
Material: gray plastic
Size: 5.00" x .73"
Weight: 0.1 lbs., 0.05kgs.