Kinedyne manufactures a complete line of Series E, A and F track designed to provide the attachment point for a wide variety of interior van cargo control systems. Kinedyne Logistic Track is designed to accept all end fittings, sockets, beams and bars designed for use in Series E, A and F track. Series E and A track are offered standard in 10 ft. (3m) lengths with special lengths available upon request. Minimum quantity may be required. Tracks can be attached with screws, rivets or by welding. A specific fastener size and/or mounting method should be determined by the vehicle manufacturer or a qualified installer. Care shall be taken to ensure that installation environments and materials do not create a potential for corrosion. Logistic Tracks Must Ship Common Carrier.   Not UPSable.

Material: High strength steel; 11 gauge
Minimum Yield: 50,000 psi.
Finish: Gray, Powder Coat.
Length: 10 ft., 3 m.
Weight: 13.0 lbs., 5.9 kgs.
Must Ship Common Carrier

Series A Vertical Track (11 ga), Powder Coated - 5 ft.

Material: High Strength Steel; 11 gauge
Minimum Yield:50,000 psi.
Finish: Gray, Powder Coat
Length: 5 ft., 1.5 m.
Weight: 6.5 lbs., 3.0 kgs.
UPSable, Additional Handling Charges May Apply

Series A Track Horizontal

Material: High strength steel; 12 gauge
Minimum Yield: 50,000 psi.
Finish: Gray, Powder Coat
Length: 10 ft., 3 m.
Weight: 15.5 lbs., 7.0 kgs.
Must Ship Common Carrier

Series A Track Horizontal 

Material: High strength steel; 12 gauge
Minimum Yield: 50,000 psi.
Finish: Galvanized
Length: 10 ft., 3 m.
Weight: 15.5 lbs., 7.0 kgs.
Must Ship Common Carrier

Heavy-Duty Series A Track Horizontal

Material: High strength steel; 11 gauge
Minimum Yield: 50,000 psi.
Finish: Gray, Powder Coat
Length: 10 ft., 3 m.
Weight: 19.0 lbs., 8.6 kgs.
Must Ship Common Carrier

Heavy-Duty Series A Horizontal Track

Material: High Strength Steel; 11 Gauge
Minimum Yield: 50,000 psi.
Finish: Gray, Powder Coat
Length: 5 ft., 1.5 m.
Weight: 9.5 lbs., 4.3 kgs.
UPSable Additional handling charges may apply

Series A Horizontal Track

Material: Aluminum
Minimum Yield: 35,000 psi.
Finish: Natural
Length: 10 ft., 3 m.
Weight: 8. lbs., 3.6 kgs

Track should always be installed with the reinforced
section at the bottom as shown.
Must Ship Common Carrier

End Cap

For use with horizontal E or A track.
Material: gray plastic
Size: 5.00" x .73"
Weight: 0.1 lbs., 0.05kgs.